Minnesota Safety Training Professionals - Safety Training When and Where you need it
RSS

Recent Posts

MSHA TRAINING SAINT PAUL, MN
HAZWOPER TRAINING AT YOUR LOCATION
OSHA 10 Hour General Industry & Construction
Upcoming safety classes
OSHA 10 Class in Minneapolis

Categories

Hazwoper
Safety Training Classes
powered by

My Blog

Safety Class Rochester, MN

Classes available - if something not listed please ask!
 
 
Accident Investigation Properly respond to a workplace accident with aninvestigation that looks toward the real reason an employee was injured and howto prevent it from happening again. The real causes of injuries are not alwayswhat they first appear to be.
 
·        Annually trainingis required depending on business policy
 
·        4 Hours
 
Aerial Lift Operators Classroom, test and hands on pre operation andoperation of Aerial Lift. This class is designed for employees who operatorhydraulic lifts.
 
·        The training isrequired every 2 years.
 
·        Video, test,pre-operation functions, hands on driving.
 
·        3-4 Hourdepending on class size & level of experience of employees.
 
Back Safety This course is designed for employees who are requiredto lift as part of their job description, however, all are welcome. Liftingtechniques and basic biomechanics will be discussed and demonstrated. If you’veever had trouble with your back, knees, shoulders, or neck; this course willgive you practical information to minimize risk factors associated withmusculoskeletal disorders (MSDs), and potential sprain/strain and injury.
 
·        Annual refresheris recommended.
 
·        1 Hour dependingon class size
 
Blood borne Pathogens Annual blood borne pathogen training covers allemployees for exposures with blood or potentially infectious materials duringthe course of their job duties. Blood borne pathogens include Hepatitis A, B,and C and HIV.
 
·        Annual refresheris required by OSHA
 
·        1 Hour dependingon class size
 
Boiler OperationTraining Training of operation of different types of boilers,including safe operation and ensuring proper function of the controls andsafety devices including preparation for boiler inspections. Link to www.damarcquality.com  Officer Mark Rudek (866)-361-4321
 
·        Nation and worldwideTraining and Inspections
 
·        Qualified and registeredto complete and perform inspections worldwide.
 
·        Federal and StateInspections  / Accident Investigations /Engineering Consulting
 
·        ASME/NB Third PartyInspections  / Boiler Useful Life Studies/ Plant Efficiency Studies
 
·        Furnace Surveys /Combustion Analysis  / CSD-1 Inspections/ NFPA 85 Inspections
 
·        Failure Analysis /Quality Control / Development of Quality Management Systems for ISO 9000, TS16949, ISO/IEC 17025, AS 9100
 
 
 
 
 
 
 
Confined Space & H2S EntrantAttendant Supervisor
 
Confined spaces are areas thathave openings large enough and so configured that an employee can bodily enterand perform assigned work; has limited or restricted means for entry or exit;and is not designed for continuous employee occupancy. Training is required forall employees who may work in a confined space. The training includesrecognition of potentially harmful atmospheres and physical hazards associatedwith these spaces. H2S training is required for anyone working in the oilfieldor petrochemical industry. Hydrogen Sulfide training is required for allworkers involved in oil exploration, production and refining. In order to worksafely around hydrogen sulfide, you must be aware of its properties andcharacteristics. This H2S Training program teaches how to recognize whenHydrogen Sulfide is present in the work area and take necessary precautions towork with Hydrogen Sulfide safely. This H2S training helps fulfill the trainingrequirements of API Recommended Practice 49, ANSI Z390.1 and other regulatorystandards. Refresher course recommend yearly depending on company policy. Alsorecommend completing SCBA orientation, medical evaluation and fit testing.
 
·        Refresherrecommend annually
 
·        4 Hours
 
·        Can be combinedwith SCBA & Medical Evaluation & Fit Testing
 
CPR/AED First Aid We offer a wide variety of courses in CPR and FirstAid. Employees are encouraged to participate in this program. Your supervisor orstate organizations may require this certification as part of your jobdescription.
 
·        Depending onorganization certification card is for two years.
 
·        4 Hours
 
Defensive Driver – Company Car & Truck Depending onpolicy, may require all employees who drive company owned vehicles an averageof more than once a month. Classroom, Test, Prestart up, Generals, Hands onDriving, Winter Driving Skills.
 
·        Initial trainingand certification prior to driving and refresher every 3 years is recommended.
 
·        2 Hours
 
Defensive Driver Semi Depending on policy, may require all employees whodrive company owned vehicles an average of more than once a month. Classroom,Test, Prestart up, Generals, Hands on Driving Skills, Winter Driving Skills.
 
·        Semi-tractor canbe provided with notice.
 
·        Initial trainingand certification prior to driving and refresher every 3 years is recommended.
 
·        4 Hours dependingon level of employees
 
Electrical Safety Compliance Training Upon completion employees willunderstand key elements of the electrical safety regulation Issued by OSHA.Attendees will develop the knowledge and skills to: understand key elements ofthe OSHA Electrical Safety regulation; recognize and correctly use key termsand concepts relating to electrical safety; recognize the importance ofelectrical safety-related work practices; differentiate between qualified andunqualified workers in order to identify appropriate training and protectionrequirements; identify key elements of a periodic inspection of the energycontrol procedure; identify the four main types of electrical injuries;identify practices and procedures to protect employees who work on or nearelectrical conductors and equipment from the electrical hazards associated withthis type of work.
 
·        2 year refresheris recommended.
 
·        4 Hours
 
Emergency Preparedness This course is designed to help employees understandthe information and preparation techniques that will help them cope in theevent of an emergency or disaster. Emergencies may include natural disasters,bomb threats, workplace violence, chemical spills, and fire. What to do before,during, and after an emergency is discussed. Emergency Preparedness is acomponent of our general safety training.
 
·        Yearly refresheris recommended depending on business policy.
 
·        2-4 Hoursdepending on type of business
 
Ergonomics Attendees will learn to recognize the signs andsymptoms of ergonomic related injuries and how to properly set up or adjust aworkstation. Handouts related to office ergonomic guidelines will be providedalong with additional information on self assessing your work environment.Course is designed for employees who work in an office setting. Participateswill learn to recognize risk factors associated with muscular-skeletaldisorders (MSDs), and potential sprain/strain injuries as well as be familiarwith the body areas affected. Useful exercises and workstation design areincluded.
 
·        Yearly refresheris recommended depending on insurance and business policy.
 
·        2 Hours dependingon type of business
 
Fall Protection Authorized Person Required for all individuals who are working at heights and are at risk of fall hazards. Overview: This is our introductory course and offers an awareness of the issues involved with fall protection. This hands on interactive session is designed to help students identify a hazard, determine possible solutions, and implement fall protection solutions. Upon successful completion of this course the student will receive a certificate acknowledging they have met or exceeded OSHA and ANSI requirements as an Authorized Person.
Topics Discussed:
  • Fall hazard recognition, elimination, and control based on Fall protection Hierarchy
  • Applicable OSHA and ANSI fall protection regulations
  • Fall Protection System – Anchorage, Body Support, and Connecting Means
  • Anchorage Point Requirements and Considerations
Proper wear, use and inspection of Full Body Harness Shock Absorbing Lanyards Self Retracting Lifelines
  • Introduction to the following systems:
Cable and Rigid Rail Horizontal Lifelines Ladder Climbing Systems Work positioning systems
·         2 Year refresher is required 
·         8 Hours with classroom & hands on training
Fall Protection Competent Person – Competent Inspector:  Recommended for - Managers, immediate supervisors of authorized persons or individuals working at height. This training includes Competent Person and Competent Inspector. Overview: This course is for individuals that are responsible for the supervision, implementation and monitoring of a managed fall protection program. This course incorporates extensive classroom and hands-on training; with both written and practical examinations that are based on the requirements of the US OSHA Regulations, and ANSI Z359.2 standard.
Topics Discussed:
  • All topics covered under Authorized Person course.
  • Fall protection system assessments
  • OSHA, ANSI Z359.2 standard regulations relating to Fall Protection
  • Fall hazard surveys and procedures
  • Detailed equipment inspection
  • Development and implementation of Fall Protection plans and programs
  • Traditional Fall Protection (e.g. handrails, guardrails, etc.)
  • Fall Restraint systems
  • Fall Arrest systems (incl.: personal fall arrest systems, nets, safe work zones and more)
  • Fall protection rescue procedures (Who do you call, how to handle situation according to PDI policy)
  • Selection and use of non-certified anchorages
  • Competent person responsibilities
Students will expand their knowledge and ability to identify hazardous conditions, develop programs, and make equipment selections to properly deal with fall hazards. Upon successful completion of this course, the student will receive a certificate acknowledging they have met or exceeded OSHA and ANSI requirements as a Competent Person.
·         2 Year refresher required.
·         16 Hours with classroom and hands on training 
 
Fire Extinguisher – Fire WatchFire extinguisher training is designed to familiarizeemployees with the types, use, and limitations of operating a fireextinguisher. This training is offered during General Safety Training, or canbe schedule for individual department as necessary.
 
·        Yearly refresherrecommended.
 
·        4 Hours
 
Fit Testing – Portacount 8038- Print out of test & card at completion.
 
·        Should becombined with SCBA respiratory training.
 
·        Annual refresherrequired
 
·        5 Minutes fortest depending on class size – 30 minutes for classroom
 
·        As low as $25.00per person – depends on the amount of students.
 
·        A MedicalEvaluation is to be done prior to fit test.
 
SCBA OrientationKnow the conditions that present respiratory hazards, to includeoxygen deficiency, high temperatures, smoke or unburned products of combustion,toxic environments, carbon monoxide, and other gasses, and confined spaces.Know SCBA component parts to include: backpack and harness, cylinder assembly,types of cylinders, cylinder testing, air quality, regulator assembly and facepiece assembly. Properly don SCBA within 1 minute with PPC in place. Properlydoff SCBA. Know operation and emergency procedures using SCBA. Know how tomaintain SCBA to include: daily/weekly/and after use maintenance, monthlymaintenance, annual or biannual maintenance, changing and servicing SCBAcylinders. Drills performed: 1. Physical activity with SCBA. 2. Shut off air supplywhen wearing SCBA, to experience emergency with SCBA.  
 
·        Annual refresher recommended
 
·        1 – 2 hours depending on the amount of students & SCBA’s
 
·        SCBA can be provided for additional cost for rent or purchase
 
Flagging Training This class instructs the student on proper flagging and trafficcontrol, as determined by WISHA standards, and also covers the flagging andsignaling rule. American Traffic Safety Services Association, You will betaught professional flagging techniques and proper work zone set-up inaccordance with standards and guidelines of the Federal Manual on UniformTraffic Control Devices (MUTCD) Course includes references to the ATSSAflagging work book, MUTCD, work shops, flagging demonstration, video, andpowerpoint presentation.    
 
·        Successful completion of course Certifies student for a period ofthree years.
 
·        4 Hours
 
Forklift Training Training includes the potential hazards associatedwith forklifts and hand-on operation of the forklift and classroom.
 
·        Forkliftcertification is required every 3 years for employees who operate forklifts aspart of their job duties.
 
·        4 Hours dependingon classroom size
 
HAZWOPER 8 This course meets therequirements in OSHA 29 CFR 1910.120 for eight hours of annual refreshertraining for workers at hazardous waste sites. This course is designed forgeneral site workers who remove hazardous waste or who are exposed orpotentially exposed to hazardous substances or health hazards. Topics includeHAZWOPER regulations, safety and health plans, hazardous chemicals, safetyhazards, air monitoring, medical surveillance, site control, decontamination,personal protective equipment, and respiratory equipment.
 
·        Annual refresher training for workers at hazardous waste sites
 
·        8 Hour Initial or refresher
 
HAZWOPER 24 HRInaccordance with Title 8 Section 5192 (e) of the General Industry Safety Orders,Training: Workers on site only occasionally for a specific limited task (suchas, but not limited to, ground water monitoring, land surveying, or geophysicalsurveying) and who are unlikely to be exposed over PELs and published exposurelevels shall receive a minimum of 24 hours instruction. In addition, workersregularly on site who work in areas which have been monitored and fullycharacterized indicating that exposures are under PELs and published exposurelevels where respirators are not necessary, and the characterization indicatesthat there are no health hazards or the possibility of an emergency developingshall also receive a minimum of 24 hours instruction. Certified curriculumincludes the following: Names of personnel and alternates responsible for sitesafety and health; Safety, health and other hazards present on the site; Use ofPPE; Work practices by which the employee can minimize risks from hazards; Safeuse of engineering controls and equipment on the site; Medical surveillancerequirements including recognition of symptoms and signs which might indicateoverexposure to hazards; and Site safety and health plans.
 
·        Annual refresher required.
 
·        24 Hours
 
H2S PLUS + Awareness just isn’tenough. We provide H2S plus. This H2S Training program teaches how to recognizewhen Hydrogen Sulfide is present in the work area and take necessaryprecautions to work with Hydrogen Sulfide safely.
 
·        Recommended taught with confined space / can be combined with FitTesting
 
·        Annual refresher recommended depending on job duties
 
·        2 Hours (without confined space)
 
Hazard Communication (HAZCOM) Hazardous SubstanceInformation and Training Act ( the Right-To-Know Law) requires that allemployees be provided with ready access to important health and safetyinformation regarding hazardous substances. Require initial and recurrenttraining of all employees who perform Work functions covered by the HazardousMaterials Regulations. Any employee whose work directly affects hazardousmaterials transportation safety is required to have training.
 
·        Yearly refresher is recommended.
 
·        3 Hours
 
Hearing Conservation This course is intendedfor employers and employees alike. It is a comprehensive program that isdesigned to teach you the basics of a great hearing conservation program. Youwill learn why you need to have a hearing conservation plan and what is requiredto be included in the plan by both OSHA and MSHA. Topics include monitoring,employee notification, observation, hearing testing, hearing protection,training, and recordkeeping.
 
·        After initial training a refresher recommended every two years oraccording to employer policy.
 
·        2 Hours
 
JSA – Job Safety Analysis Increase the knowledge ofhazards in the workplace is to conduct a job hazard analysis on individualtasks. This procedure helps integrate accepted safety and health principles andpractices into a particular operation. Each basic step of the job is examinedto identify potential hazards and to determine the safest way to do the job.Each person will write a JSA.
 
·        After initial training a refresher recommended every two years oraccording to employer policy.
 
·        2 Hours
 
Ladder Safety ScaffoldingStairwaysand ladders are a major source of injuries and fatalities among constructionworkers. OSHA estimates that there are 25,000 estimated injuries and as many as40 fatalities per year due to falls from stairways and ladders used inconstruction.
 
·        After initial training a refresher recommended every two years oraccording to employer policy.
 
·        2 Hours
 
Lockout/TagoutThiscourse provides for procedures for employees who maintain any electrical,mechanical, pneumatic, hydraulic, and other energy systems, which couldunexpectedly start up and cause injury. Authorized employees will isolate andlock and tag the equipment to warn others that maintenance is occurring andequipment cannot be operated.
 
·        Annual refresher recommended.
 
·        4 Hours  
 
OSHA 10 Hour General IndustryThisclassroom course is regarding safety and health topics and OSHA standards, isvaluable for employees and supervisors alike. Course includes an introductionto OSHA standards, inspections process and citations. Recordkeeping, walkingand working surfaces, degrees, fire protection, electrical, machine guardingand several other subjects will be covered.
 
·        Yearly refresher is recommended.
 
·        10 Hours
 
OSHA 10 Hour ConstructionThisclassroom course is regarding safety and health topics and OSHA standards, is valuablefor employees and supervisors alike. Course includes an introduction to OSHAstandards, inspections process and citations. Recordkeeping, walking andworking surfaces, degrees, fire protection, electrical, machine guarding andseveral other subjects will be covered. Yearly refresher is recommended.Electives can be contoured to your industry. Using OSHA standards as a guide,special emphasis is placed upon the most hazardous areas of a jobsite. Topicsinclude material handling, excavation, fall protection, cranes, electrical,OSHA Act, hearing conservation, PPE and more.
 
·        Yearly refresher is recommended. 
 
·        10 Hours
 
OSHA 30-Hour ConstructionThiscourse is a comprehensive safety program designed for anyone involved in theconstruction industry. Specifically devised for safety directors, foremen, andfield supervisors, the program Provides complete information on OSHA complianceissues. Using OSHA standards as a guide, Special emphasis is placed upon themost hazardous areas of a jobsite. Topics include material handling,excavation, fall protection, cranes, electrical, OSHA Act, hearingconservation, PPE and More.
 
·        Yearly refresher recommended.
 
·        30 Hours
 
 
 
 
 
OSHA 30-Hour General
 
Each of the following topics will be reviewed during the training course:
  • Introduction to OSHA
  • Contractor’s Safety/Health Program
  • Reporting & Recordkeeping
  • Electrical (Subpart K)
  • Fall Protection (Subpart M)
  • Personal Protective and Lifesaving Equipment (Subpart E)
  • Materials Handling, Storage, Use and Disposal (Subpart H)
  • Hand and Power Tools (Subpart I)
  • Scaffolds (Subpart L)
  • Motorized Mobile Platforms
  • Cranes, Derricks, Hoists, Elevators and Conveyors (Subpart N)
·         Yearly refresher recommended.
·         30 Hours
  • Excavations (Subpart P)
  • Stairways and Ladders (Subpart X)
  • The Competent Person
  • Work Zone Traffic Control
  • Forklifts
  • Concrete & Masonry
  • Confined Space Entry
  • Steel Erection (Subpart R)
  • Welding & Hot Work
  • Fire Prevention
  • Ergonomics in Construction
  • Inspection & Abatement (Subpart D)
 
 
 
Operating Heavy EquipmentJohnDeere, Komastu, Cat, Geni, JLG, Bobcat (all types covered) Loader, ToolCarrier, Skidster, Telehandler, Crane, Rigging – all types heavy equipmentcovered. Classroom and hands on equipment training. Pre-inspection, daily walkaround, winter driving, night driving, demonstrate putting attachments on andoff, performance test & daily maintenance.
 
·        Refresher recommended every two years.
 
·        4 Hours depending on level of employee
 
PEC Core 24 Hour PEC Core ComplianceProgram brings together the health, safetyand environmental training certifications (OSHA and BOEMRE) most requested byoilfield operators and other host employers. PEC Core Compliance is SafeGulfand SafeLand accredited and is accepted by every major and most mid-majoroperators in the USA, Canada and Qatar.  Eachstudent receives documentation of completion in the form of a PEC picture IDand a certificate of completion. The student’s information will be entered intothe PEC Training Tracker database. This documentation is available via theinternet through the PEC Training Tracker site. The training you will receiveare as follows:
 
SafeGulfCertification SafeLandUSA Certification Offshore Orientation (API RP 75 &API RP T-1) Confined Space Entrant / Attendant (OSHA 29 CFR 1910.146) RiggingHydrogen Sulfide (H2S) (OSHA 29 CFR 1910.1000) Lockout/Tag-out (OSHA 29 CFR1910.147) Fall Protection (OSHA 29 CFR 1926.500) Hazmat (HM 126) (DOT 49 CFRPart 171) Hazardous Communications (OSHA 29 CFR 1910.1200) Personal ProtectiveEquipment Hearing Conservation (OSHA 29 CFR 1910.95) Emergency Response ProcessSafety Management Welding Safety Defensive Driving Hazwoper (Oper.) (OSHA 29CFR 1910.120 and API RP 75) Fire Protection Medical Records Forklift Safety(OSHA 29 CFR 1910.178) Respiratory Protection (OSHA 29 CFR 1910.134) ElectricalSafety Terrorism Response Awareness Program (TRAP) Back Safety Alcohol andSubstance Abuse Awareness Offshore Waste Management.
 
·        Annual refresher required
 
·        24 Hour
 
PECPremier O&G and Petrochem industry Safe land Safe Gulf
 
ThePEC Basic Orientation safety awareness course includes both SafeGulf andSafeLand. PEC Basic was designed to take the place of multiple Operatororientations and to give each student a general idea of life and safety issuesin the oil and gas industry, upstream, downstream, onshore or offshore. Thisone-day program meets API RP 75 & API RP T-1 requirements and provides abasic understanding at an awareness level of certain general safety informationthat an employee should know before entering a company facility and whileperforming their assigned work duties. Over 25 of the leading oil and gasoperators accept this orientation as it meets their requirements. Uponsuccessful completion of course, each student is issued a picture ID with aunique barcode. The student information is then stored in an online database.This orientation has become the standard program for the industry and certifiesa student at awareness level for the following:
 
SafeGulfCertification / SafeLand Certification / Confined Space / Rigging / HydrogenSulfide (H2S) / Lockout/Tag-out / Fall Protection / Hazmat (HM 126) / Hazardouscommunications / Personal Protective Equipment / Hearing Conservation /Emergency Response / Process Safety Management / Welding Safety / DefensiveDriving / Hazwoper (Oper.) / Fire Protection / Medical Records / ForkliftSafety / Respiratory Protection / Electrical Safety / Terrorism ResponseAwareness Program (TRAP) / Back Safety / Alcohol and substance abuse awareness /Offshore Transportation (Departure, Helicopter, Boat, Arrival, etc.) OffshoreSafety (Swing Ropes / Personnel Baskets, Water Safety, etc.) Course Objectives
 
Toprepare the student to know what types of additional training they will need inorder to work for the various operators at both onshore and offshorefacilities.  
 
Tocreate a mind set in each student that will help them to play an active role inthe safety program at their work facility. To explain to each student the valueof asking questions when they do not understand a certain aspect of their job.To ensure that each employee that has completed this program has anidentification card indicating that they have completed the course.
 
·        This is required for any employee of a company that does exploration,production, drilling and/or refining work for any of the leading operators.Yearly refresher recommended.
 
·        8 hours
 
RIG PASS  General safetyprocedures / Hazard communications / Transportation rules and regulations / RigEnvironment / Emergency response techniques / Additional Rig Pass/SafeLandcourse topics: OSHA provisions to include: Fall protection * Means of egress *Stairways and ladders * Personal protective and life-saving equipment *Lockout/tagout * Fire Safety * Occupational Health and First Aid & FitTesting card & results
 
·        8 Hours
 
Trenching and Shoring Alltrenches deeper than four feet are required to have means of protecting theworker in the trench. Various methods exist such as shoring or benching of thetrench to prevent a cave-in onto the employee. Training will cover the necessaryrequirements for this activity. This course will describe in detail OSHA’sStandard - Subpart P - Excavations. This course includes the definitions tothis subpart along with specific excavation requirements, requirements forprotective systems, soil classifications, sloping and benching, timber shoringfor trenches, aluminum hydraulic shoring , alternatives, and the selection ofprotective systems.
 
·        Yearly refresherrecommended.
 
·        4 Hours
 
Welding Cutting Brazing Thisprogram is designed to help you understand key elements of the welding,cutting, & brazing regulation issued by OSHA. Yearly refresher recommended.
 
Developthe skills to understand key elements of the OSHA Welding, cutting, and brazingregulation / Recognize and correctly use key terms and concepts / Identifyconditions when a fire watch is required / Identify responsibilities of a firewatch / Recognize welding, cutting, and brazing special conditions / (Cylinderstorage and confined spaces) that require extra
 
Precaution/ Recognize the types of personal protective equipment used For welding,cutting, and brazing
 
·        Yearly refresherrecommended
 
·        4 Hour
 
Website Builder provided by  Vistaprint